DIQ/S282-CR3 WTW pH측정기 SensoLyt 700 IQ F pH전극

System-282-284_카다로그.pdf

0.88MB

· 제 품 특 징 

 

· 모델명: DIQ/S282-CR3

· SensoLyt 700 IQ F

· 3 x (0) 4 ... 20 mA, 3 x Relays

· 케이블길이 7m

  

 

· 제 품 기 능 

 

 

· 최대 2개의 센서가 있는 폐수 처리장을 모니터링하는 디지털 시스템

· USB 인터페이스 및 내부 데이터 로거를 포함한 중소 규모의 폐수 처리장용 컨트롤러 - 최대 2개의 센서, 모든 매개변수, 언제든지 사용 가능

· 모든 매개변수 사용 가능(O 2 , NH 4 , NO 3 , COD, PO 4 , 슬러지 수준, …)

· 기본적으로 USB 인터페이스 및 내부 데이터 로거

· 이더넷 인터페이스를 통해 언제든지 편리하고 사용 가능

· 새로운 컨트롤러 DIQ/S 282는 다양한 출력 신호와 함께 사용가능

· 인터넷 연결을 통해 언제 어디서나 IQ SENSOR NET에 액세스 가능

· 원격 모니터링 및 지원은 시간, 비용 및 신경을 절약

· RS 485 및 이더넷 인터페이스를 통해 필드버스 PROFIBUS, Modbus RTU, 이더넷/IP, Modbus TCP 및 PROFINET을 사용가능(옵션)

 

· 적 용 분 야

 

· 상하수, 공업용수, 실험용수 등의 수소이온농도의 측정공업, 생물, 제약, 음료, 식료품현장의 수소이온농도를 지속적으로 측정하고 조절하도록 설계되었습니다.

 

· 제 품 사 양

 

 

Max. number of sensors	2
IQ Sensor Net connections	DIQ/S 282-CR3(-E) (/24V) 1; all others 2
Outputs	3 x (0) 4 ... 20 mA, 3 x Relays, Ethernet interface for remote access, Ethernet fieldbusses PROFIBUS or Modbus RTU (options see scopes of delivery)
Display	Graphic TFT Display; Resolution: 320 x 240 pixel; backlit
Control Functions/ Function Keys	5 operating keys: measurement (M), calibration (C), set/system settings (S), 3 master keys for functions: 2 keys for: confirmation/switching menu O.K. (OK), escape (ESC) Arrow keys for rapid selection of software functions and input of alpha-numeric values (up), (down)
Electric Supply	100 … 240 VAC (50/60 Hz), 24 V AC/DC
MIQ Module Coupling at Rear	Combined mechanical and electrical connection, for rapid coupling to MIQ modules, up to 3 modules as a stack mounted unit possible
Cable Feeds	4 screw cable glands M 16 x 1.5 (expansible to M 20 if required)
Terminal Connections	Screw terminal strips; Terminal area for solid conductors: 0.2 ... 4.0 mm2 Terminal area for flexible conductors: 0.2 ... 2.5 mm2; accessible by opening cover
IQ Sensor Net Terminal Connections	Terminal connections for the IQ Sensor Net for connecting sensors
Ambient Conditions	Operating temperature: -4 °F … 131 °F (-20 °C … +55 °C); Storage temperature: -13 °F … 149 °F (-25 °C … +65 °C)
Housing Material	PC – 20 % GF (polycarbonate with 20 % fiberglass)
Protection Rating	IP 67 / corresponding to NEMA 4X (not for direct conduit connections). Conduits need to be connected with flexible adapters (CC-Box), respectively with adapters CC-PM..
Dimensions (W x H x D)	144 x 144 x 125 mm (5.67 x 5.67 x 4.92 in.)
Weight	Approx. 1,2 kg (2.6 pounds)
Certifications	CE
Electromagnetic Compatibility	EN 61326-1, Class A; FCC Class A
Integrated Overvoltage Protection	According to EN 61326-1 enhanced overvoltage protection for the entire system
Connection Medium Cable	IQ Sensor Net cable SNCIQ or SNCIQ/UG (underground cable with additional PVC coating): 2-wire with shield; 2 x 0.75 mm2; filler cord for easy connection of shield: 0.75 mm2; pressure resistant to 10 bar
Connection Characteristics	Power supply and data transmission on these wires; resistant to polarity reversal with respect to switched shield and inner conductor (no damage); comprehensive EMC shield control; Cable topology within the IQ Sensor Net system as required, e.g. in the form of a line, tree, star; total cable length max. 250 m (273 yds)
Warranty	3 years for defects of quality

· 전 극 사 양

 

Model	SensoLyt® 700 IQ	SensoLyt® 700 IQ SW*
Order No.	109170	109171
Measuring method	Electrochemical
Measuring range	0.00 ... 14.00 pH (depending on the electrode) ± 2000mV (depending on the electrode)
Resolution	0.01 pH 1mV
Integrated Preamplifier	Yes
Sensor check funktion	Yes
Temp. measurement	Integrated NTC, 23 ... 140 °F (-5 ... +60 °C)
Temp. compensation	32 ... 140 °F (0 ... +60 °C)
Pressure Resistance	10 bar
Ambient Conditions	Operating temperature: 32 ... 140 °F (0 ... +60 °C)
Electrical connections	2-wire shield cable with quick fastener to sensor
Electromagnetic Compatibility	EN 61326, Class B, FCC Class A; Intended for indispensable operation
Certifications	CE, cETL, ETL
Mechanical	Sensor body: V4A stainless steel 1.4571 Protection cap: PVC Sensor holder: POM Protection rating: IP 68
Weight (without cable)	Approx 2.14 lb (970 g)	Approx. 3.97 lb (1.800 g)
Warranty	2 years for defects in quality

 

Compatible sensors and modules

IQ Sensors (please order cable separately)
SensoLyt® 700 IQ	Digital pH/ORP fitting for SensoLyt® electrode, with integrated preamplifier and temperature sensor	109170
TetraCon® 700 IQ	Digital 4 electrode conductivity measuring cell for highly contaminated wastewater	302500
TriOxmatic® 700 IQ	Universal oxygen sensor for the measurement and regulation of oxygen input in wastewater treatment plants	201640
FDO® 700 IQ	Optical O2 sensor for connection to the IQ Sensor Net	201650
FDO® 701 IQ	Like the FDO® 700 IQ, but with a faster response time	201660
VisoTurb® 700 IQ	Digital turbidity sensor with integrated ultrasonic cleaning	600010
IQ fixed cable sensors (as long as stocks last)
SensoLyt® 700 IQ F	pH/ORP sensor with 10 m fixed cable for SensoLyt® electrodes	109177
TriOxmatic® 700 IQ F	D.O. sensor with 10 m fixed cable, supplied with accessory kit (ZBK 600)	201643
FDO® 700 IQ F	Calibration free optical D.O. sensor with 10 m fixed cable, factory calibrated	201656
FDO® 701 IQ F	Calibration free optical D.O. sensor with 10 m fixed cable, factory calibrated, with fast response	201658
TetraCon® 700 IQ F	4 electrode conductivity cell with 10 m fixed cable	302507
VisoTurb® 700 IQ F	Turbidity sensor with 10 m fixed cable and ultrasonic cleaning	600007
DIQ Modules
DIQ/JB	Dual IQ/Junction Box to connect a second or remote IQ sensor in the system 281	472005
DIQ/CHV	Dual IQ/Cleaning Head Valve, for the automatic relay-controlled compressed air cleaning in the system 281	472007